LED Driver 10W Constant Voltage

LED Driver 10W Constant Voltage

• For the supply of low voltage LED lamps
• Short circuit protection
• Thermal protection
• 12V DC output
• 500mA
• 1.0KV surge protection – EN 61547
• Secondary wiring terminals – 3 outputs
• Loop-in, loop-out primary wiring terminals
• Integrated earth terminal for earth continuity
• No junction box required
• Safety compliance – EN 61347
• EMC compliance – EN 55015, EN 61000, EN 61547
• Non-dimmable
• Parallel wiring only
• 3 Year guarantee
• NB – when used with MR8 LED lamps – minimum of 2 lamps

Please note: DC output – Correct polarity must be observed in order for LV LED lamp to operate. LED lamps must be connected in Parallel. Maximum length from driver to lamp is 20m.

Dimensions
Length 113mm – Width 38mm – Height 24mm